Drop the curtain! We are big fans of using curtains - or soft walls (as we call them) - to separate rooms in open plan apartments as well as to replace doors in front of closets or to rooms.
So, after posting How To: Hang Curtains Across Any Room, we were super pleased to recieve this recommendation from Mike for Ikea's Dignitet Hardware (with pics!). (Thanks, Mike!) MGR
I just hung some curtains from the ceiling to divide the space in my loft. I used the new DIGNITET hardware from Ikea and had pretty good luck with it, and I like its clean look. It comes with 197 inches of steel wire, which you cut down if you don't need that much (best to have some fairly burly wire cutters on hand).
Similar to the turnbuckles mentioned above, you turn a threaded rod with a small allen wrench (included) to create the right amount of tension on the cable. The only problem I ran into, is that I used drywall anchors and screws to secure it to the ceiling. But the anchors aren't really adequate for this application so I can't get quite enough tension in the cable (or the anchors will just pull out of the ceiling). So I might have to redo it with stronger anchors. But the hardware itself seems very strong.
Comments (5)
can anyone give me insight as to how this hardware is attached to the wall/ceiling? I recently moved into a loft that had the DIGNITET already installed and the mounts are in the way of some blinds I'd like to hang. the mounting is nicely hidden from view so I am not sure how to proceed uninstalling them. I have the little allen wrench and some key-like thingies, but I can only see how the hex wrench is useful. thanks much in advance!
Does anyone know how to fix one of these systems after the wire has come loose? My cat Coco also liked to play in the curtain and has pulled the wire out. Do I have to replace the whole system??
Oh, by the way, I have the DEKA system...
I have found nothing in my tool box that will cut the steel wire. Granted lots of my "cutters" are blunted due to extensive use, but come on.....what in the world is the trick?
I know that this is a bit late Wingpea, but bolt cutters work best. Many wire strippers have holes in the middle for this purpose. They prevent the wire from flexing or bending when you apply pressure via the cutters.
http://www.zbtools.co.uk/pic/ZBT3198.jpg
See the holes around the pivot joint? Insert and thwack!