
We're far from experts, but we did do this. We'd never ripped up carpet until a couple of weeks ago, but we're proud to say that the icky old wall-to-wall in our bedroom is now gone and we have (mostly) hardwood floors. Here's how we did it...

We're far from experts, but we did do this. We'd never ripped up carpet until a couple of weeks ago, but we're proud to say that the icky old wall-to-wall in our bedroom is now gone and we have (mostly) hardwood floors. Here's how we did it...
Tools:
• Dust Mask
• Work Gloves
• Box Cutter
• Hammer
• Needle-Nose Pliers
We moved all the furniture out of the room, put on some dust masks, and removed one small section of baseboard that covered the carpet. My husband took the claw of a hammer and used it to pull up a small section of carpet. Once the carpet was loose, he used a box cutter to cut it into a strip as he began to pull it up. He peeled the carpet from the floor, rolling it up as he worked.

Once the wall-to-wall carpet had been cut and removed, we were able to easily pull up the padding underneath. Below the carpet padding, we found small staples that had been used to hold the carpet in place. We pulled out the staples one by one with needle-nose pliers.

The hardwood floors underneath were in very good shape, with the exception of a small 4x6 area of ugly subfloor hiding in an alcove. Because we're renters and didn't want to spend the time or money installing hardwood floors, we chose to cover the alcove in Flor carpet tiles.

I cleaned the subfloor, then laid out the tiles in the space (we used the Thick & Thin pattern in Cocoa/Cream). I measured the carpet tiles to fit the space and trimmed the edges with the box cutter. I used double-stick carpet tape to secure the tiles. Voila...a new floor (for a grand total of $132)!
Great job Sarah!!! It looks fantastic!
view katie's profile
Thanks, Katie.
view sarah c's profile
You left out "lots and lots of Ibuprofen." Repeatedly squeezing needle-nose pliers to rip out carpet staples can be killer on the hands. But as you pointed out, ripping up carpet really isn't that complicated. And sometimes you even find a hardwood floor already hidden underneath.
view bohemiangirlpdx's profile
if you're lucky you only have one set's worth of carpet staples. i've pulled up carpet a number of times and the last time we had ancient staples (complete with wool pad bits still attached) and newer staples to contend with!
view nattles's profile
Good job! What a huge difference!
view art's profile
I so love hardwood floors. Beautiful
view Francesca's profile
I did that in a studio years ago and what did I find? gorgeous hardwood flooring and the thing of it was, it was a crapshoot as to it's condition as so many in my building at that time were pretty worn and needed a total sanding and refinishing.
Mine, judging by the lighter stain was probably done in the 50's or 60's and before any real wear took place, got covered over in wall to wall carpeting.
The stuff in there when I moved in had been well cleaned, but was looking a little warn and in the 5 years I'd been in there already, the carpeting was really in need of a deep cleaning but since they were going back to the hardwood flooring (building built in the 1920's), it was OK to take up mine. :-)
view ciddyguy's profile
It looks great! What's next? I'm waiting to see the final result.
view penelope's profile
We did the same thing this weekend! The problem with the amazing wood floors we found under the gross carpet is that now we have to replace all of our furniture. :)
view do512's profile
We recently ripped up the awful beige carpet in a house that is over 100 years old, and I think the wood underneath is original. You are so lucky that the floor underneath was in good condition!
The major problem with our floors is that over the years people have painted the floor around the edges; brown, white, brown, then brown again. So I've been stripping paint for days. It will also require a lot of sanding for it to look nice and I wonder if it's worth the effort. The wood isn't super high quality, so it may not look fantastic when finished. Should we refinish the floors properly, or just sand them down a bit and paint them?
The house will be fully renovated in a couple years from now, so this is a fairly temporary solution (I just couldn't stand the carpet another second!). So we're going to rent a sander and try to refinish the floors ourselves. Has anybody had any experience with doing floors themselves? Any tips? What about painting the floorboards? Any suggestions/advice would be greatly appreciated! Thanks!
view stoat's profile
Stoat, repainting floors is a good way to hide flaws and very chic right now. There's a great post here on "How to Paint Your Floors and Not Screw It Up" (Maxwell didn't use a sander) and another post here with a how-to from Cottage Living.
view sarah c's profile
Thank you Sarah C! I think painting is probably the best option for me at this point. Thank you for linking to such great sources!!!
view stoat's profile
I just wanted to know if you had to do anything to the hardwood floors after you uncovered them. We are renting and the landlord said there are hardwood floors underneath the berber carpet. We want to remove the carpet but I am worried about the amount of work that will be needed to resurface/refinish the floors.
view Centelleo's profile