well i wouldn't say that DIY furniture is a "bad idea" but i think making a prominent shrine for your electronics isn't the best decorating choice -- i think this stuff should be more hidden away if possible.
posted by
duckumu
on February 13th 2009 at 11:31am view
duckumu's
profile
If it's a cool-looking shrine, why not?
posted by
jooly
on February 13th 2009 at 11:41am view
jooly's
profile
Much better than the cinder block and plank solution!
posted by
hollandstudio
on February 13th 2009 at 11:43am view
hollandstudio's
profile
I've seen far-far worse come out of certain big-box stores...
posted by
bepsf
on February 13th 2009 at 12:00pm view
bepsf's
profile
ok for a dorm....
posted by
icedesign
on February 13th 2009 at 12:00pm view
icedesign's
profile
nice solution. i like the simplicity. not a fan of the swoopy shapes, but that's a style thing (although the og-post is 3 years old...). i could see grabbing 4 "premium" (i.e.: straight and sanded) solid maple or oak 1X3s from big-orange with coordinating plywood/edgebanding and doing something similar (cleaner/more-minimal) that DWR would sell for $1200
posted by
redneckmodern
on February 13th 2009 at 12:03pm view
redneckmodern's
profile
I think it's awesome this person could make a media stand for $30... hiding away stuff like this isn't always an option; we recently bought something similar (only made of metal and glass) off Craigslist for around $70, because our home theatre in the basement does not have any closet/storage space.
I would love to see it painted, though...
posted by
chikiyuu
on February 13th 2009 at 12:54pm view
chikiyuu's
profile
While as a shelf design the stereo rack is both an elegant use of a simple material and totally inoffensive, I will point out that the listed cost is rather outdated. Prices have gone up since 2005, and 1/2" baltic birch plywood in the size mentioned in the original instructions would cost at least $60. I also found the instructions a bit sketchy for someone who is not already a woodworker, and there was no picture of how to layout the parts on the plywood... good idea but a bit difficult to "copy"
posted by
fjorlief
on February 13th 2009 at 1:03pm view
fjorlief's
profile
it's one solution but it does look very dorm room chic. not my taste.
posted by
creative*type
on February 13th 2009 at 1:14pm view
creative*type's
profile
If someone could DIY this, it's certainly of a store-bought quality from the looks of it. It may have some unique characteristics or it might be a direct copy of something he already saw and wanted to buy - and said "I can make that" in the correct measurements for the components he owns. I don't know, would I want this in my home? I don't see this so hot or so not. It kind of looks generic. Good for you if you can make this and it's what you wanted. What am I going to say, that it's awful? It's not offensive in a ridiculously cheap way, like the electrical tape headboard, or pointlessly provocative like the dishes with the comic book-style nudes painted on them. It doesn't strike me as a bold and strange effort as these questions are usually posed to us.
posted by
K T G
on February 13th 2009 at 1:16pm view
K T G's
profile
Some nice coats of high gloss paint would make it even better.
posted by
sparkle
on February 13th 2009 at 1:56pm view
sparkle's
profile
I've got no problem with DIY furniture--or plywood furniture for that matter. But this is poorly scaled and the form is circa 1989.
posted by
hans111
on February 13th 2009 at 4:03pm view
hans111's
profile
Cool looking shelves. Not so hot about the electronics.
posted by
amazonikon
on February 13th 2009 at 4:32pm view
amazonikon's
profile
Nice graceful lines.
posted by
rubylionesse
on February 14th 2009 at 7:05am view
rubylionesse's
profile
The use of a belt sander, table saw, band saw, router and large pipe clamps may take this outside the realms of a few do it yourselfers.
@duckumu I like things hidden, but audio and video equipment need to breathe. It will fry your precious electronics to lock them away in a cabinet. After all, a cabinet would require an investment larger than $30.
posted by
pinkandgeek
on February 14th 2009 at 11:26pm view
pinkandgeek's
profile
Reset Password
Enter the email address you used to register and we will email you a new password.
Thank you, your account has been registered.
We have sent an email to the address you registered with for verification purposes. Please use the link in the verification email to activate your account.
Your Password Has Been Reset.
We have sent an email to the address requested with your login information.
well i wouldn't say that DIY furniture is a "bad idea" but i think making a prominent shrine for your electronics isn't the best decorating choice -- i think this stuff should be more hidden away if possible.
view duckumu's profile
If it's a cool-looking shrine, why not?
view jooly's profile
Much better than the cinder block and plank solution!
view hollandstudio's profile
I've seen far-far worse come out of certain big-box stores...
view bepsf's profile
ok for a dorm....
view icedesign's profile
nice solution. i like the simplicity. not a fan of the swoopy shapes, but that's a style thing (although the og-post is 3 years old...). i could see grabbing 4 "premium" (i.e.: straight and sanded) solid maple or oak 1X3s from big-orange with coordinating plywood/edgebanding and doing something similar (cleaner/more-minimal) that DWR would sell for $1200
view redneckmodern's profile
I think it's awesome this person could make a media stand for $30... hiding away stuff like this isn't always an option; we recently bought something similar (only made of metal and glass) off Craigslist for around $70, because our home theatre in the basement does not have any closet/storage space.
I would love to see it painted, though...
view chikiyuu's profile
While as a shelf design the stereo rack is both an elegant use of a simple material and totally inoffensive, I will point out that the listed cost is rather outdated. Prices have gone up since 2005, and 1/2" baltic birch plywood in the size mentioned in the original instructions would cost at least $60. I also found the instructions a bit sketchy for someone who is not already a woodworker, and there was no picture of how to layout the parts on the plywood... good idea but a bit difficult to "copy"
view fjorlief's profile
it's one solution but it does look very dorm room chic. not my taste.
view creative*type's profile
If someone could DIY this, it's certainly of a store-bought quality from the looks of it. It may have some unique characteristics or it might be a direct copy of something he already saw and wanted to buy - and said "I can make that" in the correct measurements for the components he owns. I don't know, would I want this in my home? I don't see this so hot or so not. It kind of looks generic. Good for you if you can make this and it's what you wanted. What am I going to say, that it's awful? It's not offensive in a ridiculously cheap way, like the electrical tape headboard, or pointlessly provocative like the dishes with the comic book-style nudes painted on them. It doesn't strike me as a bold and strange effort as these questions are usually posed to us.
view K T G's profile
Some nice coats of high gloss paint would make it even better.
view sparkle's profile
I've got no problem with DIY furniture--or plywood furniture for that matter. But this is poorly scaled and the form is circa 1989.
view hans111's profile
Cool looking shelves. Not so hot about the electronics.
view amazonikon's profile
Nice graceful lines.
view rubylionesse's profile
The use of a belt sander, table saw, band saw, router and large pipe clamps may take this outside the realms of a few do it yourselfers.
view HeritageWoodworks's profile
@duckumu I like things hidden, but audio and video equipment need to breathe. It will fry your precious electronics to lock them away in a cabinet. After all, a cabinet would require an investment larger than $30.
view pinkandgeek's profile