How To Clean Brass Using 2 Natural Kitchen Ingredients
Brass has slowly been making its way into interiors again as a trendy sheen to accent accessories. And since this was a popular addition to home decor years ago, it’s not unheard of to find good deals on brass objects while thrifting. But if your new-to-you brass has lost its brassy bite, you might need to clean it up. We’ve got the step-by-step guide to cleaning brass using only two natural ingredients you probably already have on hand!
Here’s How to Clean Brass
Ready to polish up that dingy brass piece? Here’s how to do it and what you’ll need.
Ingredients:
- 1/2 a lemon
- a teaspoon or so of baking soda
- a small bowl to mix your paste
- and some dirty brass
*adjust to suit project and juiciness of lemons
Instructions:
1. Check to see if it’s really brass
First off, you’ll probably want to know if you’re actually working with brass. This might seem obvious but old brass can get pretty dirty, and I’m not expert enough to pick fakes or brass plating. So if, like me, you’re not 100% sure, grab a magnet from your fridge and see if it sticks. If it does, you’ll want to stop right here and do some more investigating. If it doesn’t, you’re probably looking at some dirty brass.
2. Squeeze half a lemon into your bowl.
3. Add your baking soda.
It will fizz a little but settle down when you mix it.
4. Stir the baking soda and lemon mix until it forms a delicious smelling paste.
5. Use a soft cloth and apply the paste.
Gently work it into the brass. I got the best results when I rubbed the paste gently in one direction. (In the end, I mostly used my fingers)
6. Rinse off the paste and dry.
Reapply and repeat the process as and where necessary.
7. When you’re done, give the brass a really thorough rinse.
Make sure there’s no paste left over, and then dry it with a clean, dry towel.
8. If you want to buff your brass try rubbing it gently with a clean dry cloth. I’m also told that you can shine brass with olive oil.
Fresh out of baking soda? Salt works too!
Ingredients:
- 1/2 a lemon
- a teaspoon or so of salt
- dirty brass
1. Cut a lemon in half and sprinkle on a generous helping of fine grain salt.
2. Using the lemon as a scouring pad, begin to work it all around the piece, lightly squeezing the juice as you go. The slightly abrasive salt will begin to work away the tarnish.
3. Continue to work the lemon all around the piece until it is clean.
4. Rinse under warm water, and you’re all set! Can you see yourself smiling in your reflection?
Post re-edited from one that originally published 1.1.15 – AP