What You Need
photo or artwork
matting cut to an appropriate size
1/8" glass cut to the same dimensions as the matting's outer measurements
four binder clips
chip board backing cut to the same size as the glass
1. Assemble the backing, artwork, matting and glass, careful to align the edges of everything.
2. Clip the binder clips onto the assembly: two at the top and two at the bottom, measuring whatever distance you want in from the sides.
3. Remove all of the wire prongs from the two bottom clips. There are two prongs per clip: one on the front and one on the back. Remove each one by pinching them toward the center then sliding them out of the clip body.
4. Remove only the front prongs from the two top clips.
5. The back prongs should remain on the top clips - in the "up" position" - to provide a place to hang the work.
Additional Notes: Be sure the upper binder clips have a tight hold. The tightness actually varies between clips and it's important you use the strongest ones from the batch if you're going to be hanging the work by the clips. If the clips aren't tight enough, the glass and everything else will slip and fall to the floor. But tight-fitting clips are more than strong enough to support the weight of an 11x14" piece of glass.
Want more smart tutorials for getting things done around the home?
See all of our Home Hacks tutorials
We're looking for great examples of your own household intelligence too!
Submit your own Home Hacks tutorial or idea here!
(Images: Regina Yunghans / Apartment Therapy)