Kerry is renovating an 1890's farm house and did this project with reused and left over wood. Click above for pics, below for the how-to and be sure to give Kerry a THUMBS UP if you find this project helpful....
1. Table Saw / Miter Saw
2. Drill / Impact Driver
3. Air Compressor / Nail Gun
4. Wood Glue / Caulk / Paint / Rags
5. Wood (we used left over wood from other DIY projects around the house) / 1 sheet plywood / 2x4's / bead board
6. Used internet for "Locker" idea
7. heating duct
8. hinges / knobs
1. Build the box frame with 2x4's
2. Put the sides up next with plywood
3. Install dividers
4. Make the cabinet storage area
5. Measure and cut wood for the individual storage containers
6. When all together, Sand
9. Brush on tan colored paint / Let dry
10. Rag on green paint mixed with Glaze for a antique finished look. Let dry. Reapply same technique the next day. Paint cabinet doors and storage container doors with same finish.
11. Paint hinges black / and mesh metal for the vents
12 After paint is all dry, fasten hinges / knobs / vents
13. Paint Chalk paint on each individual cubby 3x
We are tearing down and building back up a 1890's old farm house. We have been reusing all the extra wood that we tear out. The bead board was left over from the dining room. We used some 2x4's that were left over from another cabinet project upstairs. I went to Sherwin Williams for the paint. They have a miss tint paint section in the back, and I bought the paint for $1. We are very thrifty. We have to be. We only have one more room left. The kitchen.... Ugh!
Give Kerry a THUMBS UP if you find this project helpful....