What You Need
Large piece of cardboard or foamboard (two to three inches larger than your monitor)
Fabric, such as felt, to cover corkboard
Sticky Back Velcro
1. Measure your monitor's screen and then add two inches to all sides. This will be the size of the frame.
2. On your foam board measure out both the overall frame's dimensions and the screen's dimensions within.
3. Using an x-acto knife, cut out the frame and then cut out the screen.
4. Do the exact same thing with the cork roll.
5. Glue the two pieces together.
6. Place the foam/cork frame on your fabric and cut a piece that is one-inch larger (on all sides) than the frame.
7. Place the frame on this newly cut fabric and mark where the screen will be. Then trace a rectangle an inch or so in from where you traced the screen.
8. Cut out the smaller rectangle on the fabric. You should now have a cut of fabric that is larger than the frame, yet has a smaller screen hole. The extra fabric on both sides is going to be used to wrap around the outer and inner edges of the frame like you would do if you were stretching canvas over a frame.
9. Place the frame cork-side down on the fabric. Pull the outer edges over onto the foam-side and glue them down. Snip into the corners of the inner edges and pull each strip over and glue it onto the foam.
10. You can add details to the frame as I did by gluing an eyelet trim on both the outer and inner edges.
11. How you affix your new frame to your monitor is up to you. We used Sticky Back Velcro on all four corners (thanks Gregory for the tip!). One side of the Velcro sticks onto the housing of your monitor and the other onto your frame. It's not the best solution though since the sticky part of the Velcro is incredibly sticky and could cause problems when you decide you don't want the frame anymore.
Want more smart tutorials for getting things done around the home?
See all of our Home Hacks tutorials
We're looking for great examples of your own household intelligence too!
Submit your own Home Hacks tutorial or idea here!