The Latest

My favorite Before & Afters are when talented people buy tired old houses and breathe new life into them. This 100-year-old house in the Phinney Ridge neighborhood of Seattle shows that a thoughtful approach to design can be modern and sustainable while still fitting in with the surrounding neighborhood.Todd Smith, of Syndicate Smith, along with his wife Julie bought their 1911 fixer-upper in 2004 and have recently completed an extensive exterior renovation.

When Andi, Dean and their building neighbors decided to re-paint the faded exterior of their Victorian home, it quickly became apparent that the process was not for amateurs. Located in the Alamo Square neighborhood of San Francisco, not far from the famous painted ladies, their building is over a century old.

Do you know what kind of looks you get when you go to the hardware store and tell the clerk you want to DIY a sliding door? When they point in the direction of “Doors & Windows,” you know it’s time to take matters into your own hands. I needed a door for a lofted space above our living room, and wanted the sliding effect. However, since it was a temporary solution, its construction needed to be simple and easy to do.

Hanging traditional wallpaper is daunting, but you can breathe a lot easier when you’ve got the removable and repositionable kind. The fear that you’ll screw up is minimal. Still, it’s helpful to know what you are getting yourself into before you get started. And tips and tricks are always handy! For this project, we used wallpaper tiles from Hygge & West designed by Laundry called Andalusia in Blush.

Whether Easter’s on its way or you’re just looking to decorate with eggs to add a touch of organic beauty around your home, blown eggs are a great way to utilize both the package, and the contents of the package with little to no waste at all. Raw eggs Thumbtack Toothpick or bamboo skewer Small bowl Straw (narrower the better) or syringe 1. Balance the egg vertically on the table and start by pressing a thumb tack into the very top point and bottom point of your egg.

A shoe rack is a great way to keep high traffic areas from getting cluttered with piles of shoes. To make one for the fancy footwear in your household, all you need is a free afternoon, power tools, and a can-DIY attitude! Personalize your rack by scaling up the length of the dowels for big shoes and boots, or scale down for those little pitter patters.

In Brittany & Jordan’s newly renovated camper, a lot of DIY went a long way. To take the living space from floral to fabulous, Brittany proudly designed and built this storage futon herself. When she couldn’t find the right futon/couch/storage solution for the camper, she used her knowledge from years of working in her dad’s shop to come up with the design, cut all the pieces, assemble, rework and reassemble the structure.

The first time I visited Thomas’ home, he told me not to focus on the light hanging in his dining room—he had plans to make a custom fixture. After it was completed, I came back to take a look and was so impressed by how he was able to implement his vision while waiting patiently for all the pieces to fall into place. I often have an idea of something I want, in my mind. An end table, a dresser, a piece of serving ware, etc.

Who says Valentines Day has to be all about flowers and perfume, and delicate things? Sure, those are nice, but if your snookums fancies craft projects and lovely artwork instead — well, this project is for them! 3′ wood dowel rods (I used 2 3/4″ diameter rods) String or twine Wood, styrofoam, or clay beads in all sizes Craft paint Power drill Saw Drill bits Scissors Sandpaper Small level (optional) Wood clamp (optional) Packing tape (optional) Craft needle (optional) 1.

Sheepskin and flokati rugs are everywhere these days — they add texture to a room, and instantly add comfort to a hard plastic or wood chair. But if you’re looking to make your sheepskin stand out from the run of the mill, or just need a little change, fabric dye is the ticket. Fabric dye 1 cup salt Rubber gloves or stir stick Soaking bucket or bathtub Water 1.

We’ve featured Amanda’s DIY projects before and she’s a bit of a DIY master. Skill Level: Moderate Time Required: 2-3 Hours Project Cost: Varies depending on mirror size Plate glass mirror Flat wooden boards, 1 inch thick by 3-4 inches wide Wooden boards, 1 inch thick by 1-2 inches wide Sheet of OSB or plywood, four inches wider and taller than the mirror size Tools Table saw Nail gun and nails Set OSB on a large flat surface, lay mirror on top, centering to fit.

When my wife was pregnant I started looking for inspiration for the nursery. I found some nice designs for a cradle, but really fell in love when I found images of a moon shaped cradle. This cradle was made by someone in France and also featured on Apartment Therapy. I decided to try and make this myself based on the images I could find online.

There’s definitely no shortage of holiday ornaments out there to buy, but there’s something so satisfying about making a few. It’s always nice to give/receive something handmade—and one-of-a-kind—and by making a few for yourself, you get to create a little memory that you can revisit every year when you pull them out to decorate the tree. These ornaments are fairly easy, adorable, and—bonus!—you’re recycling.

Stars are a major theme at Christmastime. Crafted after the Star of Bethlehem, the star-shaped, ornamental parol is said to encourage hope and goodwill during the season. Hope and goodwill? We can totally get behind that theme, so we decided to make ours in the most colorful papers and maybe even keep it up in the house throughout the new year.

Ready to up your paper snowflake game? We’re going to let you in on a little secret: it’s all in the fold. No more of that “fold any old piece of paper in half one time and cut” business. If you want a really intricate, graphic design just follow our easy step-by-step guide to get on the path to paper snowflake glory. Lightweight craft paper Sharp scissors Bone folder (optional) 1. To make your snowflake you’ll need to start with a perfectly square piece of paper.

Project by: Sabina Location: Pittsburgh, Pennsylvania We moved into our house three years ago and it was love at first sight. We loved everything about it—except the fact that it was incredibly outdated. So, after putting up with our dated, depressing kitchen for three years, in June of 2015 we finally started our dream kitchen renovation. We had replaced a few of the appliances with our own when we moved in, so we didn’t opt to get all new appliances during this renovation.

After examining endless short, tall, lumpy, skinny, and funny-looking specimens, you finally picked out that perfect pumpkin and are now ready to take it home and carve it. But before you get started, take a look at our materials list and stop by the hardware store to pick up a few important tools that will help to get the job done safely and accurately. Compass saw Fleshing tool (an ice cream scoop or ladle will work too!